CREUP GLOBAL 

     
 SUPPORT
  Battery Knowledge
  Battery Management
  Handling Instruction
  Warning & Caution
  FAQ
 

Caution!
 • Do not use or store the battery where is exposed to extremely hot, such as under window of a car in direct sunlight in a hot day. Otherwise, the battery may be overheated. This can also reduce battery performance and/or shorten service life.
 • If battery electrolyte leaks on to the skin, wash the affected area immediately with water.
 • If eyes are exposed to electrolyte, do not rub them. Instead, rinse them with clean running water and immediately seek medical attention. If left as is, electrolyte can cause eye injury.
 • The cell aluminum packing material was easily damaged by the sharp edge part such as nickel-tabs. Forbid to use any sharp part touching the battery. The battery was forbidden with metal, such as necklace, hairpin etc in transportation and storage.
 • The cell sealing edge is very easily damaged so don’t bend it. The Al interlayer of package has good electric performance. It’s forbidden to connect with exterior component for preventing short-circuits. Short the anode and the Al interlayer of package will cause corrosion or swollen of the cell.

 • The folding edge is formed in batteries’ processes and passed all hermetic tests, don’t open or deform it. The Al interlayer of package has good electric performance. It’s forbidden to connect with exterior component for preventing short-circuits. Short the anode and the Al interlayer of package will cause corrosion or swollen of the cell.
 • The cathode is Al tab and the anode is Ni tab.The battery's tabs are not so stubborn especially for aluminum tabs. Don’t bend tabs. The tab-tapes are used to isolate The anode, cathode tabs from Aluminum packing materials to prevent short-circuit, so prohibit manicuring of the tab-tapes.
 • Don’t fall, hit, bent the battery's body. Don’t knock on by sinker or trample the battery. Don’t sling the battery.